Chapter 18: Working With Tools

Removing an Object  

The process of making a photo look better is often referred to as retouching (while repairing damaged photos is referred to as restoration). Luminar offers two useful tools to make these kinds of tasks easier. Let’s explore how the tools work and when you might choose one over another.

Using the Clone & Stamp Tool

The Clone & Stamp tool works by replacing unwanted or damaged pixels with good pixels that you target. This tool is easy to use and allows you to set a sample point (where the good pixels are taken from), and then paint into bad areas (to cover up damage or blemishes). Luminar offers feathered brushes to make the blending of strokes easier.

  1. Open an image that needs cloning and stamping.
  2. Switch to the Clone & Stamp Tool by clicking its button in the top toolbar or pressing Cmd+J.
  3. Use the Zoom buttons and the Hand tool to explore the image’s details.
  4. When you find an area to Clone & Stamp, hold down the Option key and click on a clear area near the damaged pixels or skin blemishes.
  5. Chapter 18: Working With Tools

  6. Click and brush over the damaged area. 
  7. Click and paint out the pixels you want to remove. You can also try small dabs and short strokes to get a blended look. The sampled pixels are taken from the sample point and cover the unwanted pixels. Try blending multiple strokes together and lower the opacity of the brush for the best results.
  8. After each stroke, the screen blends and updates to show the new pixels.  Continue to examine the results and make additional strokes as needed.
  9. When happy with the pixel removal, click the Done button.

__________________________________________________

Tip

Here are some practical tips to get better results using the Clone & Stamp tool.

  • Try cloning at a low opacity and build up strokes.
  • Try sampling from several different places to fill in an area.
  • Experiment with blending modes.

__________________________________________________

Using the Erase Tool

The Erase tool serves a similar purpose to the Clone & Stamp tool, it’s all about removing unwanted objects or details.  But its approach is a bit different.  Rather than Option-clicking to set a source point for pixels, you simply click and paint over the unwanted areas.  Luminar then examines the surrounding pixels and generates a new texture based on its awareness of what’s nearby in the photo. The Erase tool also matches the texture, lighting, and shading of the original pixels. This approach is often quite effective as the tool is fast and easy to use.

  1. Open an image that has items you’d like to erase and remove from the image.
    Chapter 18: Working With Tools(2)

  2. Switch to the Erase Tool by clicking the Tools menu in the top toolbar.
  3. Use the Zoom buttons and the Hand tool to explore the image’s details. You can use the keyboard shortcut Cmd+= to zoom in.  Simply hold down the spacebar to switch to the hand tool.Chapter 18: Working With Tools(3)


  4. When you find an area to Erase, simply click and brush over the unwanted area. 
  5. You can adjust the size and hardness of the brush with the toolbar at the top of the screen.
  6. To subtract from the targeted areas, press the X key to toggle between adding and subtracting pixels with the brush.

  7. Chapter 18: Working With Tools(4)
  8. If you have a large area to select, choose the Polygonal Lasso tool.  
  9. Click to draw several points to create the desired shape.

    Chapter 18: Working With Tools(5)

  10. When you have a basic selection, click on the first point to close the loop.
  11. Click the Erase button to remove the selected areas.

    Chapter 18: Working With Tools(6)

  12. When happy with the pixel removal, click the Done button.


Luminar support.

Ask on Twitter.
Email the Team.

More ways to connect

Chapter 18: Working With Tools(16)